Telematics Guru
How to increase Oyster reporting frequency using Telematics Guru
Introduction Scope: This guide provides step by step instructions on how to increase the reporting frequency of an Oyster Sigfox if an asset is stolen and needs to be recovered. Overall Procedure: ● Login to the platform ● Send the new configuration ...
Sigfox Backend - Adding Error Callback To Monitor Change In Availability Of Known Base Stations
Adding Error Callbacks to a specific device type gives you more visibility whenever there is an outage in a base station where your device has connected previously. Setting up this Error Callback is done in very simple steps: Go to Device Type Then ...
USB ONYX LTE USB Dongle
We're delighted to hear that you've received the Onyx dongles. We can provide you with the following documentation. There is a guide here : https://developers.soracom.io/en/start/connect/soracom-onyx-lte/ And there are some Drivers, Basic ...
Sigfox Oyster - Changing Batteries
What Happens After the Batteries Are Inserted The internal LED will begin to flash for a period of time to indicate that the device is operational. The LED will then turn off and will not be used again to save power. The Oyster tries to get a GPS fix ...
Sigfox Call Back Issue - What does greyed-out callback status means?
The greyed-out callback status means that no callback was triggered. This was found to be caused by the incident on that day.
Sigfox Backend : Quick Integration using Callbacks
Quick Integration using Callbacks By this time, I assume that you have created your device type and have registered your first device to the Sigfox Network. Way to go! You may ask, what now? How will I get my device data flowing from the Sigfox ...
Sigfox Backend : Registering your first Sigfox Device
Registering your first Sigfox Device Pre-requisites: Device Type Setup Sigfox Id and PAC of the device Sample Only* In case your Sigfox Id and PAC does not work, you may contact your supplier or send us an email at support@thinxtra.com so we can ...
Sigfox Backend : Creating your first Device Type
Sigfox Backend : Creating your first Device Type Pre-requisites: Sigfox Backend Login Credentials Sigfox Contract with Available Tokens If you don't have any of the pre-requisites above, you may contact support@thinxtra.com so we can assist you ...
VIP's on your Sigfox Success
Very Important Principles that ONLY SIGFOX EXPERTS KNOWS. Mounting of the device It’s the climb. We couldn't express it any clearer that most devices performed better when they are mounted vertically or pointing upwards, most of the devices we've ...
Check your Sigfox Coverage: Thinxtra Coverage Tool
My device stopped communicating! It is an imperative to check the coverage around the device to give you more insight as to one of the reasons why your device suddenly stops communicating. In most cases the Thinxtra Coverage Tool could help you ...
Basic Troubleshooting a Sigfox Device
If the unit has not been transmitting it could be on of the following issues: 1. The device is in a non covered area. ○ Bring the device in a covered area. You may check using the Thinxtra Coverage Map. ○ Remove the batteries and put them ...