How to Register Devices on Sigfox backend

How to Register Devices on Sigfox backend

Pre-requisite

  1. Device ID and PAC
  2. End Product Certificate (If the device is Sigfox certified)
Step-by-step guide

  1. Log in to the Sigfox backend platform here

  2. Click on the Device tab.

  3. Click on the “New” button in the upper right part of the screen.

  1. Choose the desired group either from the Main Group or Sub-Group..

  1. Complete the device information fields : 

    1. Identifier(in hexadecimal format) - Input the device ID.

    2. Name - Input desired name of the device.

    3. PAC - Input the PAC (Porting Authorization Code) of the device.

Note: For security purposes, As soon as the device is registered for the first time or re-registered in another independent group, the PAC changes.

  1. End product certificate - Input product certificate if your device is Sigfox Ready, else tick the box and register the device as prototype.

  2. Select device type

  3. The device default setting is Activable. If this option is disabled, all messages will be dropped and the device cannot consume any token.This option could be updated by editing the device.

  1. Finally select Ok to validate and proceed on the device registration.



    • Related Articles

    • Sigfox Backend : Creating your first Device Type

      Sigfox Backend : Creating your first Device Type ​Pre-requisites: Sigfox Backend Login Credentials Sigfox Contract with Available Tokens   If you don't have any of the pre-requisites above, you may contact support@thinxtra.com so we can assist you ...

    • Basic Troubleshooting a Sigfox Device

      If the unit has not been transmitting it could be on of the following issues: 1.  The device is in a non covered area. ○      Bring the device in a covered area. You may check using the Thinxtra Coverage Map. ○      Remove the batteries and put them ...

    • Sigfox Backend : Quick Integration using Callbacks

      Quick Integration using Callbacks By this time, I assume that you have created your device type and have registered your first device to the Sigfox Network. Way to go! You may ask, what now? How will I get my device data flowing from the Sigfox ...

    • Sigfox Backend : Registering your first Sigfox Device

      Registering your first Sigfox Device Pre-requisites: Device Type Setup Sigfox Id and PAC of the device Sample Only* In case your Sigfox Id and PAC does not work, you may contact your supplier or send us an email at support@thinxtra.com so we can ...

    • How To Decommission or Unsubscribe Device

      Important notice: Once the device has been unsubscribed the active token will be permanently lost. Unsubscribing the devices is the only way to stop billing. Support@thinxtra.com can also help on decommissioning / unsubscribing the device by just ...